Environmental Settings - Canon imageFORMULA P-208II User Manual

Environmental Settings

To configure the environmental settings of CaptureOnTouch, open
the [Environmental settings] dialog box.
Click (CaptureOnTouch icon) in the taskbar, and select
[Environmental settings] from the menu.
The following describes the setting items of each tab displayed in the
[Environmental settings] dialog box.
[Basic settings] Tab
On the [Basic settings] tab, configure the following settings.
Launch method setting
By default, CaptureOnTouch becomes resident in the system when you
start your computer. Clear the [Make CaptureOnTouch resident] check box
to not make CaptureOnTouch resident in the system.
Display
Select the [CaptureOnTouch appears when the scanner is connected]
checkbox to open the main screen of CaptureOnTouch automatically
when the scanner is connected to the computer. This setting is only
enabled when CaptureOnTouch is running (or resident in the system).
When this setting is enabled, the [Do not display the main screen when
the scan is started with the scanner button] setting is disabled.
If the [Do not display the main screen when the scan is started with the
scanner button] check box is selected, the main screen of
CaptureOnTouch is not displayed when the Scanning Shortcut scanning is
started by pressing the scanner's Start button. However, dialogs and error
messages during scanning and the pop-up screen when the scan is
completed will be displayed.
When this setting is enabled, the [Enable additional scan] and [Edit after
scanning] check boxes on the Edit Scanning Shortcut settings screen are
disabled.
Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the configuration file
(settings, registered jobs, etc.) of CaptureOnTouch and restore the
settings from the backup data.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.cot). You can
store the initial settings of CaptureOnTouch by performing a backup before
you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup file.
When using multiple computers, you can back up the environmental
settings of one computer and then perform a restore on the other
computers so that all of the computers have the same settings.
60