Setting Basic Scanning Conditions - Canon imageFORMULA P-208II User Manual

When scanning of the first document finishes, Scan Panel appears and
the scanner enters the wait state. If you place the next document and then
click [Continue scanning], scanning of the placed document starts.
You can stop scanning part way through by clicking [Finish].

Setting Basic Scanning Conditions

This section provides an overview of the basic setting items that are
the minimum requirements when configuring the scanner settings.
Confirming Basic Conditions for Scanning
When you scan a document, make sure you confirm the [Color mode],
[Page Size], [Dots per inch], and [Scanning Side] basic conditions in the
Basic settings dialog box.
68