Canon imageFORMULA P-208II User Manual page 48

If using the same document selection and output combination the
next time, click the [Save to Shortcut] button.
The selected [Output] and [Select document] will be added to the
[Scanning shortcut] panel.

If you configure scanning conditions that consume a large amount of
the computer's memory, scanning may stop because of insufficient
memory. If an error message appears due to insufficient memory
while scanning is in progress, stop scanning, change the scanning
conditions, and then try scanning again.

A multiple-page scan cannot be saved when it reaches the file size of
2 GB. Change the save settings if an error message is displayed.
If scanning continuously, set the next document, and click the
[Scan more pages] button to start the document scan.
5
To check the scanned image, click the [Finish] button.
To edit scan images, see Operations for the scanned image edit window52.
Click the [ ] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the main
window.
When the output has finished, a popup window will be displayed. If saving
the scanned image, a link to open the save destination folder will be
displayed.
This completes the Standard Scanning.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.
47