Table of Contents
Advertisement
2. Set the correct programme and options for the
type of load.
3. Press the Start/Pause touchpad.
The programme starts.
CHANGE A PROGRAMME
1. Turn the Programme knob to
2. Set the programme.
AT THE END OF THE PROGRAMME
When the programme is completed:
•
An intermittent acoustic signal operates (If the
Buzzer function is on).
•
The indicators End/Anticrease and Filter comes
on.
•
The Start/Pause indicator is on.
The appliance continues to operate with the crease
guard phase for approximately other 30 minutes.
The crease guard phase removes creases from
your laundry.
You can remove the laundry before the crease
guard phase is completed. We recommend, for
better results, that you remove the laundry when the
phase is almost completed or completed.
When the crease guard phase is completed:
HINTS AND TIPS
PREPARING THE LAUNDRY
•
Close the zippers.
•
Close the fasteners of the duvet covers.
•
Do not keep ties or ribbons loose (e.g. apron
ribbons). Tie them before you start a
programme.
•
Remove all items from the pockets.
•
If an item has the internal layer made of cotton,
turn it inside out. Make sure that the cotton layer
is always external
•
We recommend that you set the correct
programme applicable for the type of fabrics
that are in the appliance.
Fabric label
10
OFF
Laundry that is applicable for tumble dryer.
Laundry that is applicable for tumble dryer. Set the programme with standard
temperature.
Laundry that is applicable for tumble dryer. Set the programme with low tempera-
ture.
•
Start/Pause indicator goes off.
1. Turn the Programme knob to
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Always clean the filter when a
programme is completed.
STAND-BY FUNCTION
To decrease the energy consumption, this function
automatically deactivates the appliance:
•
After 5 minutes if you do not start the
programme.
•
After 5 minutes from the end of the programme.
INDICATOR LIGHTS
These lights indicate the following functions:
•
Drying : This light indicates that the appliance is
in the drying phase.
•
End/Anticrease : This light is on at the end of
the cooling phase, during the anticreasing
phase and at the end of the programme.
•
Filter : This light illuminates at the end of the
programme to remind you that the filters must
be cleaned.
•
Do not put fabrics with strong colours together
with fabrics with light colours. Strong colours
can bleed.
•
Use an applicable programme for cotton jersey
and knitwear to prevent the items to shrink.
•
Make sure that the laundry weight is not more
than the maximum weight that is in the
programme table.
•
Dry only the laundry that is applicable for tumble
dryer. Refer to the fabric label on the items.
Description
OFF
Hide quick links:
Advertisement
Table of Contents
