Kyocera Mita FS-1900 User Manual page 35

4 All Calls
3 Security
You must enter the lock code to see what is in the
security menu. Typical default values are either the
last 4 digits of your phone number or 0000.
1 Lock Mode
2 Restrict
3 New Code
Display the total number of calls
and time (minutes and seconds)
including calls made while in the
home system and while roaming.
This is NOT resettable.
Choose when you want the
phone to lock. Possible settings:
"on power up," "now," "never."
"Now" immediately locks the
phone.
When the lock code is entered,
this is reset to "never."
"On power up" locks the phone
when the phone is turned on.
"Never" means that the phone is
never locked.
When locked, you can only make
emergency calls or receive
incoming calls. All other
functions of the phone are
disabled. If you forget your lock
code, please call your service
provider for help.
Set phone use restrictions to
"yes" or "no." If set to "yes," you
can only make calls to
emergency numbers and phone
numbers in locations 1 to 9.
Enter a new four digit lock code
number.
35