Getting Started; Installing The Battery - Kyocera K323 User Manual

1 G
ETTING

Installing the battery

Your Kyocera K323 phone comes with a
removable lithium ion (LiIon) battery.
charge the battery before using the phone.
You must use a Kyocera-authenticated battery in
your phone. If you attempt to use a battery that has
not been authenticated you will receive a security
warning. Contact your service provider to obtain a
Kyocera-authenticated battery.
To install the battery:
Hold the phone
1.
face down.
Slide the battery door
2.
downward to remove it.
Place the battery in the
3.
phone casing with the
metal contacts facing
towards the bottom of
the phone.
Replace the battery door
4.
by sliding the notches into
the openings at the
bottom and outside edges
of the battery casing.
Slide the door up to
5.
secure the cover
into place.
User Guide for the Kyocera K323 Phone
S
TARTED
Fully
Charging the battery
You must have at least a
partial charge in the battery
to make or receive calls.
To charge the battery:
Connect the AC adapter
1.
to the jack on the bottom
of the phone.
Plug the adapter into a wall outlet.
2.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
The battery will not charge if you use the
Note:
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
To remove the battery, make sure the phone
Note:
is powered off.
1