Using The Camera - Kyocera K323 User Manual

9 U
SING THE
Tips before operating your
camera
• You cannot activate the camera while
on an active call or while browsing files in the
media gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a "Low memory" error, check your
resolution and quality compression settings.
See "Setting up the camera for photos" on this
page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Accessing camera mode
• Press until you hear two beeps
to activate camera mode or select
→
Menu Camera.
User Guide for the Kyocera K323 Phone
C
AMERA
Setting up the camera for
photos
While in Camera mode, press
1.
.
select
Options
Press to select
2.
Highlight an option and press
3.
– options are On, Off, or Automatic.
Flash
– options are 1280 x 1024 (best
Resolution
for printing), 640 x 480, 320 x 240 (best
for sending to email), and 160 x 120.
–
Low Light Mode
low light environments.
– options are Off (default) or 3,
Self Timer
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot
– allows you to take up to six
Multishot
multiple pictures while the camera key is
pressed and held. A tone will play each
time a picture is taken. A second tone will
play when the final picture is taken.
–
Shutter Sound
the camera takes a picture.
to
.
Settings
:
brightens the picture for
mode is activated.
sets the sound used when
45