Making And Answering Calls; Making A Call - Kyocera K323 User Manual

2 M
AKING AND

Making a call

Make sure you are in an area where a signal can
be received. Look for the
screen. The more bars you see in this symbol, the
stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
"Power Save" on your phone's screen, press any
key to return to normal operating mode.
Open the flip.
1.
Enter the phone number and press
2.
Press or close the flip to end the call.
3.
Voice number dialing
Voice dialing requires that a contact be saved with
a voice tag. See page 42.
Press to initiate voice dialing.
1.
Say the name of the contact when prompted
2.
"Say a name." The phone places the call.
Press once.
3.
Digit dialing
Press to initiate voice dialing.
1.
When prompted say "dial".
2.
When prompted "Speak a digit", say a digit.
3.
After the voice recognizer repeats the digit say
the next digit.
8
A C
NSWERING
symbol on the home
.
ALLS
Follow the prompts.
4.
Press to end the call.
5.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
• Press to answer the incoming call.
-or-
• Press to answer the incoming call and
turn on the speakerphone.
Answering calls using the flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls.
→
• Select
Menu
Open to Answer
– Select
Disabled
continue ringing when you open the flip.
Adjusting the volume during a call
• To adjust the earpiece volume during a call,
press
→
Settings Convenience
→
.
Enabled
to have the phone
up or down.

Making and Answering Calls

→