Data Settings - Kyocera K323 User Manual

Select one of the two lines and press
2.

Data Settings

Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
→
Select
1. Menu Settings
.
Com Port Speed
Select the speed. The options are:
2.
(default),
115.2 kbps
There may be a higher charge for
Note:
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
To purchase a cable, call 800-349-4188
Note:
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
Connect the phone to the laptop or PC.
1.
40
.
→ →
Accessories
19.2 kbps
, and
230.4 kbps Other
.
Set the Com speed.
2.
Select
3. Menu
Data/Fax Calls
Press
4.
–
Voice only
– ,
Fax next call
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
– ,
Fax until off
phone into fax mode or data mode until
,
the phone is turned off.
.
You cannot receive voice calls while the
Note:
phone is in data/fax mode.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
using the phone with a TTY device.
Connect the TTY device to the phone.
1.
Enter
2.
your keypad.
Press
3.
Close the
4. Information
to select
Highlight
5. TTY On
→ →
Settings Network
.
to select an option:
allows only voice calls.
or ,
Data next call
or ,
Data until off
Enable TTY only when
Note:
to select the option.
TTY
window by pressing
.
OK
and press
Customizing Your Phone
→
sets the
forces the
from
.