Table of Contents
Advertisement
BTFP02000 AIR COMPRESSOR
OPERATION AND MAINTENANCE MANUAL
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
BOSTITCH FASTENING SYSTEMS
N199753 07/2012
Advertisement
Table of Contents
Related Manuals for Bostitch BTFP02000
Summary of Contents for Bostitch BTFP02000
- Page 1 BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR. BOSTITCH FASTENING SYSTEMS N199753 07/2012...
-
Page 2: Table Of Contents
INTRODUCTION Congratulations on your purchase of a High Performance BOSTITCH Portable Air Compressor. This compressor has been designed to provide compressed air to power various pneumatic tools - including pneumatic fastening tools. Before assembling, operating or maintaining this air compressor, users must read and understand the information contained in this operation and maintenance manual. - Page 3 Attachments and Accessories: For any attachment or accessory you will be using with this compressor, the maximum allowable recommended pressure should be clearly marked on the product or should be clearly noted within the operations manual. Exceeding the pressure rating of these attachments (including, but not limited to:air tools, air operated accessories, spray guns, air hose, air hose connections, tires and other inflatables) could cause them to fly apart or explode and could result in serious injury.
-
Page 4: Electrical Grounding Instructions
COMPRESSORS AS FAR FROM SPRAYING AREA AS POSSIBLE. Risk of Burns: All air compressors generate heat, even operating under normal conditions. Bostitch compressors have been designed to reduce the risk of burns by limiting access to tubes and cylinder head parts. In areas where tubes are exposed, a protective sheathing has been added to the tubes to reduce risk;... -
Page 5: Specifications
ELECTRICAL GROUNDING INSTRUCTIONS: (continued) DUTY CYCLE: To ensure long life of your BOSTITCH air compressor, do not operate on more than a 50% duty cycle. If this air compressor pumps air more than 50% of one hour, then the compressor’s capability is less than the air delivery required by the application. -
Page 6: Features
FEATURES OF THE BOSTITCH BTFP02000 A. Pressure Switch: - The pressure switch is the activation mechanism that is used to start and stop the compressor. When the switch is “On”, the motor and pump will compress air until tank pressure reaches the upper limit of the factory set operating pressure. -
Page 7: Operation Instructions
Prior to performing service and maintenance to the compressor, always disconnect all accessories and attachments from the unit, and disconnect the compressor from the electrical source. When replacing parts, only use Genuine BOSTITCH replacement parts. Notice!: This compressor is equipped with an oil-free pump. There is no oil to replace or check. - Page 8 Stanley Australia recommends that all torque wrenches be recalibrated at least once per year, depending on usage); (f) Bostitch branded pneumatic staplers or nailers are warranted for a period of seven (7) years from the date of purchase; and (g) Bostitch compressors and tools used in production applications are warranted for twelve (12) months from the date of purchase.
-
Page 9: Warranty
(d) Consumable items, such as batteries, trimming knives, drill points, surform blades, hacksaw blades, hole saws, staples or nails, if they have been used; (e) Universal sockets, universal joints, thin-wall impact sockets, adapters and retaining rings; (f) Facom products that are not distributed through Stanley Australia's authorised distributors and resellers;... - Page 11 NOTES:...
Need help?
Do you have a question about the BTFP02000 and is the answer not in the manual?
Questions and answers