(such as a fuse, battery, etc.), are not warranted. Before sending your product in, you will need to fill in Cincoze RMA Request form and obtain a RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service.
| User’s Manual Compact Size Fanless Computer Prefaces Technical Support and Assistance 1. Visit the Cincoze website at www.cincoze.com/support.php where you can find the latest information about the product. 2. Contact your distributor or our technical support team or sales representative for technical support if you need additional assistance.
DC-1000 | User’s Manual Compact Size Fanless Computer Prefaces Safety Precautions Before installing and using this device, please note the following precautions: 1. Read these safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Disconnected this equipment from any AC outlet before cleaning.
Package Contents Before installation, please ensure all the items listed in the following table are included in the package. Q’ty Item Description DC-1000 Embedded System Utility DVD Driver Quick Installation Guide DIO Terminal Block Connector (Female) Power Terminal Block Connector (Female)
DC-1000 | User’s Manual Compact Size Fanless Computer Prefaces Optional Accessories Model Name Description Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch, GSM60A12-CIN GSM60A12-P1J US 2 heads power cord, US B type to IEC C13, SVT 18AWG/3C Black 1.8M...
Compact Size Fanless Computer Chapter 1: Product Introduction 1.1 Overview DC-1000 is a compact size (185mm (W) x 131mm (D) x 54mm (H)) system designed with onboard Intel® Atom™ D525 processor, 1.8GHz and Intel® ICH8M chipset, rich I/O, and unique expansion capability.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 1: Product Introduction 1.3 System I/O 1.3.1 Front Panel ATX power on/off switch AT/ATX mode select switch Press to power-on or power-off the system Used to select AT or ATX power mode...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 2: Jumpers and Connectors 2.1 Jumpers Settings When setting the jumpers, ensure that the jumper caps are placed on the correct pins. When the jumper cap is placed on both pins, the jumper is short. If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is open.
Page 20
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 2: Jumpers and Connectors CF1:CompactFlash Connector Connector type:CompactFlash Type 2 Definition Definition Definition IOW # Data 3 Data 4 Interrupt Data 5 Data 0 Data 6 Data 1 Data 7 Data 2...
Page 26
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 2: Jumpers and Connectors LAN1:RJ45 with LED Connector Definition Definition LAN_MD0P LAN_MD2N LAN_MDIN LAN_MD1N LAN_MD1P LAN_MD3P LAN_MD2P LAN_MD3N Act LED Status Definition Link LED Status Definition Blinking Yellow Data Activity Steady Green...
Page 27
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 2: Jumpers and Connectors LINE_OUT1:Speaker-out Jack (Green) MIC1:Microphone Jack (Green) Connector Type:5-pin Phone Jack Connector Type:5-pin Phone Jack Definition Definition OUT_R MIC_R OUT_L MIC_L MINIPCIE1:Mini PCI-Express Socket Definition Definition Definition WAKE# +3.3V...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.1 Removing the Chassis Bottom Cover In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.2 Removing the Chassis 1. Loosen the 3 screws as mark on photo and place them aside. 2. Hold front and rear panel and lift up the body of unit vertically.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.3 Installing a Half Size Mini PCIe Card on Top Side 1. Locate the Mini PCIe slot. 2. Use provided two screws on bracket to fasten the module and bracket together.
Page 34
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot. 45°...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.4 Installing a Full Size Mini PCIe Card on Top Side 1. Locate the Mini PCIe slot. 2. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.5 Installing Antennas 1. Remove the antenna hole covers at back panel. 2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack.
Page 37
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 4. Assemble the antenna and antenna jack together. 5. Attach the RF connector at another end of cable onto the module.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.6 Installing a Mini PCIe Card on Bottom Side(Half Size) 1. Turn over the body of unit. Unscrew the 3 screws on HDD bracket and remove the bracket.
Page 39
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 4. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot. 45°...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.7 Installing a Full Size Mini PCIe Card on Bottom Side 1. Locate the Mini PCIe slot. 2. Tilt the Mini PCIe module at 45 degree angle and insert it to the slot until the gold-pated connector of module contacted firmly with the slot.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.8 Installing a SATA Hard Drive 1. Lift up the empty HDD bracket by unscrewing the 3 screws. 2. Make the PCB side of the HDD face up, place the HDD bracket on it. Ensure the direction of bracket is correct and use 4 provided screws to assemble HDD and HDD bracket together.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.9 Installing a SODIMM 1. Locate SODIMM socket. 2. Tilt the SODIMM module at a 45 degree angle and insert it to SODIMM socket until the gold-pated connector of module contacted firmly with the socket.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.10 Installing the Chassis 1. Hold the body of unit, level the 3 screw holes with the hollow studs on the chassis. 2. Make sure the either sides of front and rear panels are in the chassis grooves and insert the...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.11 Installing the Chassis Bottom Cover 1. Level the grooves on bottom cover with front and rear panels. Put on the cover. 2. Fasten the 4 screws to fix the cover.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.12 Installing a SIM Card 1. SIM card slot is at the front panel of the system. 2. Remove the mounting cover by unscrewing the two screws. 3. Insert the SIM card.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 3: System Setup 3.13 Installing a CF Card 1. Locate the CF card slot. 2. Remove the mounting cover by unscrewing the two screws. 3. Insert the CF card.
Chapter 3: System Setup 3.14 Wall Mount Brackets DC-1000 offers Wall Mount that customers can install system on the wall in convenient and economical way. 1. The mounting holes are at the bottom of system. Use provided 4 screws to fasten the bracket with each side of system together.
Chapter 3: System Setup 3.15 Side Mount Bracket DC-1000 offers Side Mount that customer can install system to the right or left side of wall to create effective of space. 1. The mounting holes are at the bottom of system. Fasten the 4 screws to fix the side mount bracket with system together.
Compact Size Fanless Computer Chapter 3: System Setup 3.16 VESA Mount Brackets DC-1000 offers VESA Mount that customer can mount system with panel complying with VESA 75mm and 100 mm standard for various usage. 1. The mounting holes are at the bottom of 2.
Chapter 3: System Setup 3.17 DIN-Rail Mount Bracket DC-1000 offers DIN-Rail Mount that customer can install system on the DIN Rail. 1. The mounting holes are at the bottom of system. Fasten the 2 screws to fix the DIN-Rail mount bracket with system together.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup 4.1 BIOS Introduction The BIOS (Basic Input/Output System) is a program located on a Flash Memory on the motherboard. When you start the computer, the BIOS program will gain control. The BIOS first...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup 4.2 Main Setup Press <Del> to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup 4.3 Advanced Setup The Advanced menu allows users to set configuration of the CPU and other system devices. You can select any of the items in the left frame of the screen to go to the sub menus.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup 4.3.2 IDE Configuration ■ ATA/IDE Configuration This can be configured as Disabled, Compatible or Enhanced. ■ Configure SATA as This can be configured as IDE or AHCI.
Page 56
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup LBA/Large Mode Enabling LBA causes Logical Block Address-ing to be used in place of Cylinders, Heads and Sectors. Block (Multi-Sector Transfer) Any selection except Disabled determines the number of sectors transferred per block.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup 4.3.3 Super IO Configuration This item enables users to set the Super IO device status, including enabling of COMs.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup ■ Serial port 1 Address [3F8 ] This item allows user to adjust serial port 1 address. Serial port 1 IRQ [IRQ4] This item allows user to adjust serial port 1 IRQ.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup Chapter 4: BIOS Setup 4.3.5 ACPI Configuration Use this item to select options for the ACPI Settings, and change the value of the selected option.
Page 60
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup Chapter 4: BIOS Setup ■ Advanced ACPI Configuration ACPI Version Features This item allows user to enable RSDP pointers to 64-bit fixed system description tables.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup Chapter 4: BIOS Setup 4.3.7 USB Configuration You can use this item to select options for the USB Configuration, and change the value of the selected option ...
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup 4.4 PCI/PnP Setup This section is used to configure settings for PCI/PnP devices.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup 4.4.1 Clear NVRAM Set this value to force the BIOS to clear the Non-Volatile Random Access Memory (NVRAM). The Optimal and Fail-Safe default setting is No. 4.4.2 Plug & Play O/S When set to No, BIOS configures all the devices in the system.
DC-1000 | User’s Manual Compact Size Fanless Computer Chapter 4: BIOS Setup Chapter 4: BIOS Setup Chapter 4: BIOS Setup Chapter 4: BIOS Setup 4.5 Boot Setup The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus.
Need help?
Do you have a question about the DC-1000 and is the answer not in the manual?
Questions and answers