C C
O O N N N N E E C C T T I I O O N N
Connecting to Monitor
Connect the VIDEO Out jack to the monitor VIDEO In jack.
CCD Camera
• As the connecting method varies with the instruments,
refer to the manual supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE
jack on the back of your camera. For details, see page 39.
• Only connect the cable when the power is turned off.
• Set the
75Ω/Hi-Z selection switch as shown below if you
have an intermediate device.
Intermediate
CCD Camera
18
COLOR CCD CAMERA
Monitor
End monitor
Connecting to Power
Connect the power plug to a normal, grounded AC/DC outlet.
Use AC 24V/300mA or DC 12V/500mA power source.
Be sure to connect power only after all the installation is complete.
NOTE
Note that AC adaptor is not supplied with camera.
Use the UL listed, class 2 power transformer of AC 24V adaptor.
Ground should be connected to the GND terminal.
C C
O O N N N N E E C C T T I I O O N N
19
COLOR CCD CAMERA