High Resolution Zoom Color Camera SCZ-2273 User Manual SCZ-2373...
Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCZ-2273/2373 SERIES • NTSC MODEL • PAL MODEL SCZ-2273/2373N SCZ-2273/2373P ■ MODEL DESCRIPTION • SCZ-2273/2373X _ SIGNAL SYSTEM •...
safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CAUTION: COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
ﬁ re or electric shock. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modiﬁ cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
safety information FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.
ﬁ lled with liquids, such as vases, shall be placed on the apparatus Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin’s will to create...
Component names and functions CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications Connecting to 8P Control Terminal CAMERA OPERATION Menu Conﬁ guration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Speciﬁ cations Dimensions SAMSUNG-T PROTOCOL SAMSUNG-T Protocol Command Description COMMAND DESCRIPTION 8_ contents...
HLC(High Light Compensation), SENS-UP, FLIP(H/V-REV), D-ZOOM, SHARPNESS, MOTION DETECTION and PRIVACY functions are provided. Communication RS-485, Coaxial communication methods are supported. - RS-485 Communications : SAMSUNG-T, SAMSUNG-E, Pelco-P, Pelco-D, Panasonic, Bosch, Honeywell, AD, Vicon. - Coaxial Communications : Pelco Coaxitron English_9...
introduction The camera’s OSD is complimented by 18 foreign languages. - NTSC : Korean, English, French, Spanish, Japanese, Portuguese - PAL : English, French, German, Spanish, Italian, Chinese, Russian, Czech, Polish, Portuguese, Romanian, Serbian, Swedish, Danish, Turkish WHAT’S INCLUDED High Resolution Zoom Color Camera SCZ-2373 Quick Guide...
COMPONENT NAMES AND FUNCTIONS BOTTOM ➋ ➊ ➊ Tripod Mounting Bracket Screw Hole Used to ﬁ x tripod mounting bracket on top of the camera. ➋ Tripod Mounting Hole 1/4"-20 UNC (20 THREAD) Used to install the camera on an optional tripod. L:4.5mm±0.2mm (ISO standard), The tripod must be equipped with screws with or 0.197"...
introduction BOTTOM VIEW ➎ ➌ ➏ ➍ ➐ ➌ Key Buttons Following buttons control zoom, focus, and auto focus functions. WIDE button : To widen the view. (ZOOM OUT) TELE button : To close in on a far object. (ZOOM IN) F-NEAR button : To see a near object clearly.
connection CONNECTING TO MONITOR Connect Video Out Jack to the monitor's Video In jack as shown below. CCD Camera Monitor Connection methods may vary depending on the video equipment. Please refer to the model speciﬁ c instruction manual. Connect cables with the unit powered down. CONNECTING TO POWER Power Input Terminal DC 12V, 500mA / AC24V, 500mA...
USING COAXIAL COMMUNICATIONS The camera can be controlled by using external controllers like a Remote controller. (RS-485 Communication) • Coaxial Communications System • OSD Control method • If you set the sensitivity level of the sub menu item (of COAX) to “Low”, you have to press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu.
CONNECTING TO 8P CONTROL TERMINAL The camera can be controlled by using external controllers like a Remote controller. (RS-485 Communication) SPC-6000 8-Pin CABLE ASSY SPC-200 * 8P Control Terminal Configuration Name Cable color Description Name Cable color Description ZOOM ORANGE BLUE FOCUS WHITE/ORANGE...
connection Connector Function Signal Level +6V ~ +12V Tele ZOOM Wide -6V ~ -12V +6V ~ +12V FOCUS Near -6V ~ -12V 5±0.5sec USER Vcc There is motion There is no motion DAY mode : D&N terminals must be OPEN to external signals. EX DN (Do not input voltage) NIGHT mode : D&N terminal must be connected to the ground...
camera operation MENU CONFIGURATION MAIN SETUP MENU SSDR MANUAL AWC SET WHITE BAL OUTDOOR INDOOR MERCURY BACKLIGHT MOTION DET MODE ZOOM TRACK ZOOM SPEED D-ZOOM ZOOM POS INIT USER PRESET FOCUS LENS INIT RETURN BRIGHTNESS IRIS SHUTTER SSNR3 SENS-UP EXPOSURE RETURN PRIVACY DAY/NIGHT...
camera operation MENU SETUP Use the five buttons on back of the camera. UP button SET/AF button LEFT button DOWN button RIGHT button 1. Press the SET button for 2 seconds. (Short-pressing the button activates the AUTO FOCUS). • Main setup menu is displayed on the monitor screen. MAIN SETUP Select feature SSDR...
SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of images with high contrast between bright and dark spots MAIN SETUP SSDR WHITE BAL When the SETUP menu screen is displayed, select ‘SSDR’...
camera operation Select one of the following 6 modes, as appropriate for your purpose. ATW : Select this when the color temperature is between 1,800˚K and 10,500˚K. MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode, fine-tune the White Balance and then press the Function Setup switch.
Select a desired mode using the Left and Right buttons depending on the camera purpose. OFF : Cancels the BLC function. BLC : You can specify a desired area on the BLC SETUP video manually and set the area to be LEVEL MIDDLE displayed more clearly.
camera operation MOTION DETECTION The camera detects an object’s movement by MAIN SETUP sensing disparity of outline, brightness levels and SSDR color. The camera sends a detection signal out WHITE BAL via the MD output terminal and will zoom into a BACKLIGHT pre-determined point.
DETECT AREA : Motion Detection and DETECT AREA tracking will only occur IIIIIIIIIIIIIIIIIIIII within this deﬁ ned BOTTOM IIIIIIIIIIIIIIIIIIIII area. (Full Screen LEFT IIIIIIIIIIIIIIIIIIIII is deﬁ ned as factory RIGHT IIIIIIIIIIIIIIIIIIIII default). RETURN MASK AREA : Specify a detection MASK AREA exception area to mask.
camera operation FOCUS Press the SET button to access the MAIN SETUP main setup menu and then position the SSDR indicator over FOCUS using the UP or WHITE BAL DOWN button. BACKLIGHT MOTION DET Press the SET button. FOCUS MODE : You can select the most EXPOSURE suitable zoom mode.
- MANUAL : Select 'MANUAL' and press the SET button ZOOM/FOCUS POS SETUP to conﬁ rm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions moving directional buttons while verifying the changes on screen. Press the : TELE : WIDE SET button once desired image quality is : NEAR...
ZOOM POS INIT FOCUS SETUP Moves to the controlled ZOOM position MODE AUTO when the power is truned on and the initial ZOOM TRACK AUTO TRACK ZOOM position has been set. ZOOM SPEED FAST D-ZOOM - AUTO : If you turn the power off and on, ZOOM POS INIT the zoom magnification level is USER PRESET...
LENS INIT FOCUS SETUP Use the left or right button in the ‘Lens MODE AUTO initialization’ item select ‘Automatic’ or ZOOM TRACK AUTO TRACK ‘Manual’ and then press the SET button. ZOOM SPEED FAST - AUTO : The lens can automatically be D-ZOOM set by a pre-selected day, from ZOOM POS INIT...
EXPOSURE From the Main Setup menu, select MAIN SETUP EXPOSURE and press SET. You can now SSDR change the exposure setting. WHITE BAL BACKLIGHT Press the SET button to access the MOTION DET main setup menu and then position the FOCUS indicator over FOCUS using the UP or EXPOSURE...
- MANUAL : Manual shutter speed setting. - A.FLK (NTSC: 1/100, PAL: 1/120) : Flicker-free mode. - ESC : Automatic shutter speed setting (optimal). Auto operation is possible only when the IRIS is set to MANUAL. ➋ If you choose ’MANUAL‘, select the optimal shutter speed. - In MANUAL mode, the optimal shutter SHUTTER MANUAL SETUP speed needs to be designated.
SSNR(Samsung Super Noise Reduction): On screen noise reduction. ➊ Position the indicator over 'SSNR' EXPOSURE SETUP using the UP or DOWN button. BRIGHTNESS ➋ IRIS AUTO Set 'SSNR' to the desired mode using SHUTTER the LEFT or RIGHT button. HIGH...
SPECIAL Press the SET button to access the MAIN SETUP main setup menu and then position the SSDR indicator over 'SPECIAL' using the UP or WHITE BAL DOWN button. BACKLIGHT MOTION DET Press the SET button to confirm. FOCUS PRIVACY : Hide the area that you want not EXPOSURE SPECIAL to be displayed on the screen.
- AUTO : The mode is switched DAY/NIGHT AUTO SETUP to 'Color' in a normal environment, but switches to DWELL TIME 5 SEC 'B/W' mode when ambient DURATION SLOW illumination is low. To set up RETURN the switching time or speed for AUTO mode, press the SET button.
- Protocol : Select the communication RETURN PROTOCOL. (SAMSUNG-T, SAMSUNG-E, Pelco-P, Pelco-D, Vicon, Panasonic, Bosch, Honeywell, AD.) - CAM ID : Determines the camera's identiﬁ cation number (between 0 and 255). - BAUD RATE : You can select 2400/4800/9600/19200/38400/57600/115200 bps.
- RET PKT : You can choose whether to send an ACK signal when the communication control command is issued to the camera. - COAX : You can select whether to use COAX communication. If you use the COAX communication, you prevent malfunctions by selecting low sensitivity levels against noise.
CRT : Please select this menu item CRT MONITOR SETUP when using a CRT monitor. PED LEVEL COLOR LEVEL RESET RETURN USER : Please use this menu item when using a monitor other than standard ones. You can change the gamma, PED level, and color gain in the sub menus. - RETURN : Return to the SPECIAL menu.
➎ Enter a title, move the cursor to ‘POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by moving the 4 direction buttons and press the SET button. When the position is determined, select.
troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM ► Ensure that your camera is supplied with rated power as appropriate.
SAMSUNG-T Protocol Command Descri p ti o n Function Save current user preset conﬁ guration information. Command Packet CAM ID HOST ADDR User Preset Save Return Packet CAM ID HOST ADDR Parameter P1:00h(USER PRESET 1) ~ 80h(USER PRESET 128) Function Execute selected user preset.
0003h CHECK SUM 0003h CHECK SUM 0007h CHECK SUM 0007h CHECK SUM 0005h CHECK SUM 0005h CHECK SUM 00B1h CHECK SUM 00B1h CHECK SUM 0008h CHECK SUM 0008h CHECK SUM 0010h CHECK SUM 0010h CHECK SUM 0004h CHECK SUM 0004h CHECK SUM 0002h CHECK SUM...
SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungcctvusa.com...