Table of Contents
Advertisement
1
G
ETTING
Phone battery
Install the battery
To install the battery:
1. Hold the phone
face down.
2. Unsnap the battery
door by sliding your
fingernail into the
recess located at the
bottom of the
battery door.
3. Place the battery in
the phone casing with
the metal contacts
toward the bottom of
the phone.
4. Place the tabs at the
top of the battery door
in the openings at the
top of the battery well.
5. Press the battery door
until it snaps into place.
Charge the battery
You must have at least a partial charge in the
battery to make or receive calls.
User Guide
S
TARTED
To charge the battery:
1. Connect the AC adapter
to the jack on the
bottom of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
Warning: If you are using a 400 mA charger with
any of the following part numbers:
CV90-G2968-01; CV90-G2610-02; or
CV90-60859-1, please be aware that this power
unit is intended to be correctly oriented in a
vertical or floor mount position.
Recharge the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: Before removing the battery, make sure the
phone is powered off.
1
Advertisement
Table of Contents
