Auto Answer; Power Backlighting; Hearing Aid - Kyocera Deco E1000 User Manual

Kyocera cell phone user guide
Hide thumbs Also See for Deco E1000:
Table of Contents

Advertisement

Auto answer

When a headset or hands-free kit is attached
to your phone, the phone can be set to
answer automatically.
To turn auto answer on, Select
>
Settings
Accessories
. It will automatically answer
After 5 Seconds
after 5 seconds.

Power backlighting

You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
Note: Power backlighting may not be
available with the optional desktop charger
or other accessories.
Select
>
Menu
Settings
and one of the following.
Pwr Backlighting
sets power backlighting to normal.
Normal
keeps power backlighting when
Always On
an accessory.
Tip: Use the power backlighting as a night light
when traveling.
Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select
>
Settings
Accessories
and a speed. There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
52
>
Menu
>
>
Auto-Answer
>
>
Accessories
>
Com Port Speed
TTY device
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to the phone.
2. Enter
with your keypad and
##889
select
. or, select
TTY
>
Accessories
TTY Device
3. You will see a notification, select
4. Select
to connect or
TTY On
not connect.

Hearing aid

Enable your phone to operate with a T-coil
Hearing Aid device. Select
>
Accessories
Hearing Aid
Note: Enable Hearing Aid only when being used
with T-coil Hearing Aid device.
>
>
Menu
Settings
.
.
OK
to
TTY Off
>
>
Menu
Settings
>
>
.
OK
Enabled
Accessories

Advertisement

Table of Contents
loading

Table of Contents