Network - Kyocera Deco E1000 User Manual

Phone information
You can access information regarding your
phone. Select >
Menu
and one of the following:
Phone Info
• shows specific software and
Build Info
hardware information.
• shows the icons used by
Icon Keys
your phone.

Network

Data and fax calls
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note: To purchase a cable, visit
www.kyocera-wireless.com/store
To enable data/fax mode, select
>
Settings Network
the following:
turns data/fax mode off.
•
Voice Only
or
•
Fax, next call
phone to data/fax mode for the next incoming
call or the next ten minutes.
• or
Fax, until off
phone to data/fax mode until the phone is
turned off.
48
>
Settings My Phone
.
>
Menu
> and of
Data/Fax Calls
sets the
Data, next call
sets the
Data, until off
Privacy alert
You set your phone to alert you when enhanced
> digital CDMA privacy is lost or regained. Select
>
Menu Settings
.
Enabled
Voice privacy
Set your phone to use enhanced digital CDMA
privacy. Select
Voice Privacy
Data setup
Set your phone's connection type for data
applications. Select
>
Network
•
Automatic
based on your service.
•
QNC Only
switched calls.
•
1XRTT Only
packet data.
User name
Allows you to set a user name and password if
your phone is data enabled.
1. Select
Menu
User Name
2. Enter or modify your user name. Select
3. Enter or modify your password. Select
> >
Network Privacy Alert
> >
Menu Settings
> .
Enhanced
>
Menu Settings
and one of the following:
Data Setup
select the best connection type
allows only standard circuit-
allows the use of high-speed
> >
Settings Network
.
>
>
Network
>
>
.
Next
.
Done
Network