25) Turn the ENGINE BOARD over and use the SS-93
to release the BEZEL FPC. Then remove it. Do not use
the BEZEL FPC again.
27) Use the SS-93 to detach the antenna assembly
and then remove it.
29) Remove the two screw bumpons with the
dental tool. Do not use them again.
16
26) Release the HEAT SINK ASSEMBLY with the SS-93
and then remove the assembly.
28) Slide the phone open.
30) Unscrew the two Phillips size 00 screws in the
order shown. Do not use them again.
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia N97 RM-505/RM-506/RM-507
Service Manual Level 1&2
Version 4.0