7). Unscrew the six TORX + size 4 screws in the order
shown. Do not use them again.
9) Open the slide and use the SRT-6 to release the
clips of the lower part.
11) Close the slide.
13
8) Then unscrew this TORX + size 4 screws. Do not
use it again.
10) Slide the SRT-6 along the cover to release all the
clips.
12) Carefully lift up the upper part to gain access to
the TILT FPC ASSEMBLY connector.
Confidential Copyright © 2010 NOKIA All rights reserved
Nokia N97 RM-505/RM-506/RM-507
Service Manual Level 1&2
Version 4.0