RAM ProMaster 2014 Owner's Manual page 150

148 UNDERSTANDING YOUR INSTRUMENT PANEL
turned off, the radio will display the message 60 MIN
for three seconds and switch off automatically after 60
minutes if no buttons are pressed.
If you prefer, you can set Auto Switch to ON (see
SETUP MENU section). The radio will then follow two
parameters: ignition and previous state. If the ignition is
turned off with the radio on, the radio will be turned off,
but will come on again when the ignition is turned on.
When it is turned on, the radio will display a greeting
message. When it is turned off, the radio will display the
message GOOD BYE before it switches off.
Audio
You can use the AUDIO button to access the available
audio settings (described in the sections below).
Equalizer
Pressing the AUDIO button for more than two seconds
activates the audio equalizer functions in the following
sequence: FLAT POP
CAL JAZZ USER
edly to change the equalization. If this button is not
pressed again within five seconds, or if you press the
ROTARY knob, the display returns to the previously
selected view and the settings will be saved.
Custom Audio Setting Functions
Press the AUDIO button for less than two seconds to
activate the Balance function.
Repeatedly pressing the AUDIO button activates the
other custom audio setting functions in the following
sequence: Bass Treble
ness Bass. If this button is not pressed again within
five seconds, or if you press the ROTARY knob, the
display returns to the previously selected view and the
settings will be saved. USER equalization must be se-
lected to activate the Bass and Treble functions.
ROCK CLASSIC
FLAT. Press AUDIO repeat-
Balance Fader Loud-
VO-