Table of Contents
Advertisement
TOOL SPECIFICATIONS
Overall Length .................................................................... 32 in. (81.28 cm)
Width ................................................................................... 10 in. (19.05 cm)
Weight ............................................................................ 9.75 lbs. (4.22 kg)
Pitch ............................................................................... .375 in. (8.26 mm)
Chain Gauge ................................................................. .050 in. (1.47 mm)
Chain Bar Length .......................................................... 16 in. (40.64 cm)
Flow Range ............................................................... 4-8 gpm (15-30 lpm)
Operating Pressure............................... 1,000 - 2,000 psi (69-140 bar)
WARNING
WARNING
All hydraulic fluids that meet these listed specifications or the listed HTMA specifications
may be used for this tool.
S. U. S.
O
O
@ 100
F (38
C) ........................................................................... 140 TO 225
O
O
@ 210
F (99
C) ......................................................................... 40 minimum
FLASH POINT ........................................................ 340
POUR POINT ..... ..................................................... -30
These specifications must be strictly adhered to for this tool
to function properly. Any deviation can cause severe injury
or death. Use only factory specified parts when repairing
and/or replacing. Severe damage to the tool can occur with
non-specified parts.
Always use chains rated for 4,200 FPM (1,280 MPM) or higher.
Always use chains that meet applicable safety code specifications.
Failure to heed these warnings could result in severe bodily injury.
HYDRAULIC FLUIDS
7
O
O
F min. (170
C min.)
O
O
F min. (-34
C min.)
Advertisement
Table of Contents
