Advertisement
INTRODUCTION
Introduction
Thank you for your purchase of the Thunder Tiger eHawk 1500 .
going to lift for those who are eager for the thrill of soaring. Standard equips efficient outrunner OBL29/09-
07A and performance folding prop that make eHawk 1500 an outstanding 1.5M EP glider in the market.
Advanced from its brother eHawk 1400, the new 1500 combines proven RG15 airfoil plus convenient
removable wing halves and V tail design for easy transportation.
The eHawk 1500 is designed for intermediate pilot minded. Before beginning the assembly read the
instructions thoroughly to give an understanding of the sequence of steps and a general awareness of the
recommended assembly procedures. Check the entire contents of your kit against the parts drawing and
photos to make sure that no parts are missing or damaged. This will also help you to become familiar with
each component of your plane. If you find that any of the parts are either missing or damaged, please
contact Thunder Tiger Distributors for Customer Service.
TABLE OF CONTENTS
Introduction.................................................................................................................................2
Parts Drawings............................................................................................................................3
Wing.........................................................................................................................................4
Tail...........................................................................................................................................5-6
Prop.......................................................................................................................................7-8
Balance.....................................................................................................................................9
Safety Precautions.....................................................................................................................11
OTHER ITEMS REQUIRED FOR ASSEMBLY
A checklist is provided as below which will make shopping for these items easier.
Brushless Motor: Recommend
OBL29/09-07A motor ( No.2354)
Controller:
ACE
BLC12A
(No. 8026) is a perfect controller
that controlling OBL
motor
efficiently.
Battery: Recommend the use
of a ACE Power Lipo battery
3 S 1 P 1 1 0 0 mA h ( N o . 2 8 0 4 )
This new generation of a 1.5M glider is
Radio: A 4- channel radio with
3 micro servos is required.
Adhesives: You will need two
types of adhesives for the
eHawk - Epoxy and Instant
(cyanoacrylate) adhesives.
TOOLS AND SUPPLIES NEEDED
Mixing Stick for Epoxy
Medium Grit Sand Paper
Rubbing Alcohol
Paper Towel
Hobby Knife
Ruler
Pen, Pencil or Marker
Phillips&Flat Head Screw Drivers
Scissors
Nose Plier
Drill Bit 9/64"(3.5mm)
2
Open the box and check that you have all the parts as shown below.
AS6586 Fuselage Set
Fuselage (1)
3x5mm Screw (2)
Standoff (1)
Servo Tray (1)
Wing Mount A (2)
Wing Mount B (2)
AS6587 Main Wing Set (T. Magenta)
AS6587L Main Wing Set (T. Blue)
AS6587Y Main Wing Set (T. Yellow)
AS6587X Main Wing Set ( Any Color)
Main Wing (L/,R/1)
No.2354 OBL 29/09-07A
AS6243 Control Horn
Backplate (2)
2x22mm Screw (2)
Outrunner Brushless Motor 29/09-07A (1)
AS6592 Tail MOUNT
AS6589 10x6 Folding Prop Set
Tail Mounting
Tail Mount (1)
Blade (2)
Strip (1)
2x8mm Washer
3x6mm
Screw (2)
Setscrew (1)
M2 Hex Wrench (1)
AS6590 Pushrod Set
Aileron Pushrod (2)
Elevator Pushrod (2)
PARTS DRAWINGS
AS6593 Canopy
Canopy (1)
Wood Screw (3)
Blind Nut (4)
AS6594 Tail Boom
Velcro (2)
Tail Boom (1)
Torque Rod (2)
Carbon Tube(2)
3x20mm Screw (4)
AS6588 Tail Set (T. Magenta)
AS6588L Tail Set (T. Blue)
AS6588Y Tail Set (T. Yellow)
AS6588X Tail Set (Any Color)
Control Horn Base (2)
Nylon Horn (2)
V Tail (1)
3x6mm
Spinner(1)
Back Plate(1)
M2.5 Locknut (2)
Setscrew (2)
2x6mm Self-
2.6x16mm Socket
tapping Screw(1)
Cap Screw (2)
M1.5 Hex Wrench (1)
AS6591 Decal
JE6927
Clevis (4)
Decal (1)
3
2X5 mm
Eyelet (4)
Hide quick links:
Advertisement
