Panasonic DMC-FP3 Lumix Basic Operating Instructions Manual page 119

Hide thumbs Also See for DMC-FP3 Lumix:
Table of Contents

Advertisement

Meanings and required responses to major messages displayed on LCD monitor.
[MEMORY CARD ERROR]
The card format cannot be used with this camera.
Save needed data on a computer or other device, and then use [FORMAT] on he camera. ( 22)
[INSERT SD CARD AGAIN]
Access to card has failed.
Insert card again.
Try with a different card.
[MEMORY CARD ERROR]
Card is not of SD standard.
When cards in capacities of 4 GB or more are used, only SDHC or SDXC memory cards are
supported.
[READ ERROR]/[WRITE ERROR]
Data read has failed.
Check whether card has been inserted correc ly ( 11).
Data write has failed.
Turn off power and remove card, before re-inserting and turning on power again.
Card may possibly be damaged.
Try with a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING
SPEED OF THE CARD]
When recording motion picture, use a card rated with an SD speed class of 'Class 6' or higher.
SD speed class refers to a specification for sustained write speeds.
If recording stops even when using a card with speed of 'Class 6' or faster, the data wri ing speed is
low. We recommend backing up the data on the memory card and reformatting it. ( 22)
Motion picture recording may be automatically terminated with certain cards.
[A FOLDER CANNOT BE CREATED]
Folder numbers in use have reached 999.
Save needed data on a computer or other device, and then use [FORMAT] on he camera. ( 22)
[PICTURE IS DISPLAYED FOR 16:9 TV]
AV cable is connected to camera.
To remove message immediately
To change aspect ratio
USB connection cable is only connected to camera.
Message disappears when cable is also connected to another device.
[THIS BATTERY CANNOT BE USED]
Use a genuine Panasonic battery.
Battery cannot be recognized as terminal is dirty.
Wipe any dirt away from the battery terminal.
[NO BATTERY POWER REMAINS]
The battery level is low.
Charge the battery before use. ( 9)
[FORMAT THIS CARD?]
[TRY ANOTHER CARD]
[MEMORY CARD PARAMETER ERROR]
[PLEASE CHECK THE CARD]
[PICTURE IS DISPLAYED FOR 4:3 TV]
Press [MENU].
Change [TV ASPECT] ( 22).
87
VQT2P49

Advertisement

Table of Contents
loading

Table of Contents