[Copy] - Panasonic DMC-FP3 Lumix Basic Operating Instructions Manual

For details about the setting procedure in the [PLAYBACK] menu ( 15)
You can copy pictures between built-in memory and memory card.
Set-up: Press [MENU]
Select copy method (direction)
When selecting [
[SET]
Touch [YES]
If there is not enough space on the built-in memory for copying to be performed, turn off
the power, remove the card, and delete pictures from the built-in memory.
Copying of picture data from the built-in memory to memory cards will be terminated
midway if there is insufficient space on the card. Using memory cards with higher
capacities than the built-in memory (approx. 40 MB) is recommended.
Copying pictures may take several minutes. Do not turn off power or perform other
operations during copying.
If identical names (folder/file numbers) are present in the copy destination, a new
folder for copying will be created when copying from built-in memory to card (
Identically-named files will not be copied from card to built-in memory (
Printing and protection settings will not be copied. Set the settings again after copying.
Only pictures from Panasonic digital cameras (LUMIX) may be copied.
Original pictures will not be deleted after copying (to delete pictures ( 33)).
This setting can only be made when the Playback Mode is in [NORMAL PLAY].

[COPY]

[PLAYBACK] menu
: Copy all pictures from built-in memory to card (go to
step )
: Copy 1 picture at a time from card to built-in memory.
], select a picture with
• To cancel Touch [CANCEL]
• After confirmation, touch [CANCEL] to return to the menu
screen.
(Screen shown is example)
Touch [COPY]
and touch
).
).
77
VQT2P49