Recommended Shift Speeds; Skip Shift Indicator Light - Dodge 2013 SRT Viper Owner's Manual

182 STARTING AND OPERATING

Recommended Shift Speeds

To use your manual transmission for fuel economy it
should be upshifted as listed below. Shift at the vehicle
speeds listed for acceleration. Earlier upshifts during
cruise conditions (relatively steady speeds) will result in
increased fuel economy, and may be used as indicated.
MANUAL TRANSMISSION
RECOMMENDED SHIFT SPEEDS
1-2 2-3
mph 15 25
(km/h) (24) (40)
Higher upshift speeds may be used to obtain a desired
acceleration rate.
3-4 4-5 5-6
40 45 50
(64) (72) (80)

Skip Shift Indicator Light

There are times when you must shift the trans-
mission directly from first gear into fourth gear
instead of from first gear into second gear. This
is to help you get the best possible fuel
economy from your vehicle. This occurs when engine
coolant is higher than 107°F (42°C), and vehicle speed is
greater than 16 mph (26 km/h) but less than 18 mph
(29 km/h), and engine speed is less than 1,650 RPM, and
the transmission is in first gear, and the accelerator is at
20% throttle or less. The "Skip Shift Indicator Light"
located in the tachometer will illuminate during these
times.
When the "Skip Shift Indicator Light" illuminates, the
shift mechanism will only allow shifts from first gear to
fourth gear. After you shift the transmission into fourth
gear, you can press the clutch in and shift to another
forward gear.