Panasonic HDC-SD1 Operating Instructions Manual page 17

Attaching the lens cap (Included
in the Filter Kit (VW-LF43NE;
optional))
Attach the lens cap to protect the surface of the
lens.
≥When the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) is attached to
the front of the lens hood, use the lens cap
included in the Filter Kit.
1
Pass the end of the lens cap cord
through the belt.
2
Pass the lens cap through the
loop.
3
To attach or remove the lens cap,
hold both sides of the lens cap
with the tips of your finger and
thumb.
Tripod receptacle
The tripod receptacle is a hole used to mount a
tripod for the unit. Use of Panasonic's
VW-CT45E (optional) standard tripod is
recommended. (For details on mounting the
tripod, refer to the operating instructions for the
tripod.)
≥You cannot use a tripod with a fixed tripod pin.
A Camera base
B Screw for mounting the unit
C Tripod pin
≥You can perform operations easily using the
remote control when the tripod is used. (l 18)
≥The battery cover cannot be opened when the
tripod is used. Insert the battery before
attaching this unit to the tripod. (l 23)
Before using
17
VQT1A34