Table of Contents
Advertisement
x 3
A
B
x 3
x 1
C
x 2
Warning! Remove and keep all
transit devices so that they can be re-
fitted if the appliance ever has to be trans-
ported again.
Necessary tools
10 mm
30 mm
• Remove the cardboard top.
• Remove the polystyrene packaging materi-
als.
www.zanussi.com
• Remove the exter-
nal film. Use a cut-
ter, if necessary.
1
2
• Remove the polystyrene base from the
bottom.
• Remove the power supply cable and the
draining and inlet hose from the hose hold-
ers on the rear of the appliance.
• Spread the front
piece on the floor
behind the appli-
ance and then lay
the appliance care-
fully rear side
down on it. Make
sure that no hoses
are crushed in the
process.
• Return appliance
to it's upright posi-
tion.
• Open the door and
remove the plastic
hose guide, the
bag containing the
instruction booklet
and the plastic
plug caps from the
drum.
7
Hide quick links:
Advertisement
Table of Contents
