Bracket Identification - Yamaha Virago 750 Installation Manual

motorcycle. Located near rear turn signals Use new bolts provided.
(10M x 25mm long) It may be necessary to loosen or remove backrest
covers or hardware in order to easily access rear frame bolts. After
Bracket C and D installation, reattach and/or tighten backrest mounts.
5) Attach Bracket E(left) / F(right) to bottom of Brackets A & B and to
the TOP of the forward hitch arms. Ensure hitch is square on
motorcycle and snug bolts for Brackets A, B, and E,F at this time.
6) Raise rear of hitch so bottom of Brackets C & D are flush with top
of rear hitch plate. Ensuring that hitch is square with motorcycle,
carefully mark hole locations for bottom of Brackets C&D on rear hitch
plate. Drill rear hitch plate holes with 3/8 inch drill. This step ensures
proper alignment and spacing of hitch on the motorcycle.
7) Tighten all bolts ensuring that hitch is square on motorcycle.
Periodically check bolts for tightness.

Bracket Identification