Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hotpoint SG E12 AA0 UK
Summary of Contents for Hotpoint SG E12 AA0 UK
- Page 1 Operating Instructions...
- Page 2 SG E12 AA0 UK | SG DC11 AA0 UK | SG C10 AA0 UK SG DC11 AA1 UK...
-
Page 6: General Safety Instructions
• If the plug, power cord or appliance appear to be damaged or if any vi- sible damage or water leaks are found, do not operate the iron. In such cases have it checked by Hotpoint’s authorised staff in order to avoid any hazardous situation. -
Page 7: Description Of The Appliance
Do not fill the water reservoir by holding the appliance directly under the tap. Always use the water measurer supplied with the appliance. Welcome to Hotpoint's Garment Care. Thank • Make sure you have disconnected the plug from you for purchasing our new Power Perfection the electrical socket before filling and emptying steam generator. -
Page 8: Before Use
use of the appliance. If a 13 amp plug (BS 1363) is used it must be fitted • Use the supplied mat with compact generator, with a 13 amp fuse, either in the plug or adaptor or at and keep iron in a horizontal position. the distribution board. If you are in any doubt regarding the electrical supply Replacing the fuse to your machine, consult a qualified electrician before use. -
Page 9: Using Your Iron
As soon as the Never add any perfume, vinegar, starch, selected steam quantity is available, the Steam scale-removing agents, ironing products or Ready indicator light (20) will turn on. other chemicals in the water reservoir - unless recommended Hotpoint. Never contaminated water. -
Page 10: Using The Appliance
Press the steam button (14) to use the steam ironing function. We recommend using the Fabrics with this symbol on the label must not be ironed. steam button function when the temperature is higher than GARMENT TEMPERATURE STEAM Wait for the temperature indicator light to FABRIC TYPE LABEL INDICATION... -
Page 11: Cleaning And Maintenance
steam quantity needed to iron your garments. socket and let the steam generator cool down. To start the Eco function set the steam control (16) to Clean the plastic parts of the steam generator Eco ( ). When the Steam Ready indicator light (20) with a soft damp cloth and dry. - Page 12 HINTS Empty the boiler of any residual water. Fill the boiler with 500 ml of water. Then close, shake the steam generator and empty it. Repeat If your steam generator is equipped with the Optimal the operation at least twice. Soleplate Temperature technology, you need not Close the boiler, making sure its closing cap has adjust the temperature and/or steam.
-
Page 13: Troubleshooting
TROUBLESHOOTING Problem Possible causes / Solutions The soleplate stays cold and • The plug was not inserted or is not making contact. does not warm up. • Make sure the temperature is not set to Min. • The temperature indicator light is on. This shows that the iron is The temperature indicator light goes on and off. - Page 14 The no-water indicator light • The water reservoir needs filling. is on. • The water reservoir was not fitted correctly. Place the water reservoir in the relevant housing until it clicks into place. • The Steam Ready indicator light turns on to show that the steam The Steam Ready indicator generator has reached the desired steam settings. When you use light turns on and off.
-
Page 15: Essential Contact Information
The product is used only on the electricity supply printed on the and offer you an additional free 1 year guarantee when you register your rating plate. product with Hotpoint within 28 days of purchase. If you do not register • The product has been used for normal domestic purposes only. - Page 16 Indesit Company UK Ltd Morley Way, Peterborough PE2 9JB www.indesitcompany.com...