Operating Tips - Vornado VH101 Owner's Manual

† In smaller areas, you might prefer to set the unit in Low mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
† In larger spaces, you might prefer to set the unit in High mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
† The VH101, draws up to 6 amps of electric current. If using your
VH101 on High setting causes your home circuit breaker or fuse to
trip, we offer the following suggestions:
† Try turning off other electrical appliances that run on the same
circuit as your heater.
† Run your heater in Low mode.
Have your electrician add an additional circuit to your home's
†
electrical system.
† ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR ANY
ELECTRICAL APPLIANCE.
† Do not use more than one heater at a time.
† Never ignore or take lightly the signs of an electrical problem, such
as:
† Warm outlet cover plates
† Sparking at outlet when plugging in or during operation
† Light flickering or dimming (indicates a shared circuit or problem)
Investigate the cause of these before continuing to use the heater.

Operating Tips

English
11