Using Coaxial Communications - Samsung SCB-3000 Series User Manual

* RS-485 Communication establishment initial value
Item Camera ID
Initial value
Notes
• To control the camera by constructing an additional controller, use the SAMSUNG-T,
SAMSUNG-E, PELCO-D, PELCO-P, BOSCH, HONEYWELL, VICON and PANASONIC, GE, AD
protocol.

Using Coaxial Communications

• Coaxial Communications System
• OSD Control method
• If you set the sensitivity level of the sub menu item (of COAX) to "Low", you have to
press the MENU/ENTER (OSD KEY) button twice in a row to access the OSD menu.
(To prevent an error by noise from the DVR)
CAMERA DVR
SET MENU/ENTER
UP UP KEY
DOWN DOWN KEY
LEFT LEFT KEY
RIGHT RIGHT KEY
• Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
BAUD RATE
1 9600
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
DVD RECORDER
OPEN/CLOSE
Distance
300m
450m
600m
COLOR CCD CAMERA
UART MODE
8-NONE-1
DVR
ALARM HDD NETWORK BACKUP REC
1 2 3 4
5 6 7 8 ZOOM FREEZE BACKUP SEARCH
9 10 11 12
TELE WIDE VIEW PRESET
MODE AUDIO ALRAM MENU
13 14 15 16
USB
RETURN
Recommended Cable Specification
3C2V(RG-59/U)
5C2V(RG-6/U)
7C2V(RG-11/U)
19
User Guide
RET PKT
ENABLE
: BNC
•
• ---- : RS-485