Camera Title Setup - Samsung SCB-3000 Series User Manual

Notes
• When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
• If you increase the SHARPNESS level too high, the picture may become distorted or noise
may appear.
CAM TITLE : If you enter a title, the title will appear on the monitor.
1) If the SPECIAL menu screen is displayed, use the Function Setup button so that the
arrow indicates 'CAM TITLE'.
2) Set it to 'ON' by using the Function Setup
button.
Press the set button.
3)
4) Use the Function Setup button to move to
a desired letter and select the letter by
pressing the set button. Repeat this to
enter multiple letters. You can enter up to
15 letters.
5) Enter a title, move the cursor to 'POS' and press
the set button. The entered title appears on the
screen. Select the position to display the title on
the screen by using the Function Setup button
and press the set button. When the position is
determined, select 'END' and press the set
button to return to the SPECIAL menu.
Notes
• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even
if you enter one.
• and Numbers are available in this mode.
• If you move the cursor to CLR and press the set button, all the letters are deleted. To edit
a letter, change the cursor to the bottom left arrow and press the set button. Move the
cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the set button.
35
COLOR CCD CAMERA User Guide

CAMERA TITLE SETUP

A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 0 1 2 3 4 5 6 7 8 9
C L R P O S E N D
FRONT DOOR