Install Brake And Shifter Cable; Install Handlebar - Performer Goal-26X Assembly Manual

Install Brake and shifter cable

Install handlebar

There are two handlebar options for Goal suspension recumbent. OSS and USS.
OSS Handlebar
1. Place the Riser on the stem and tighten riser clamp (pic 11)
2. Align the riser to the front wheel
3. If the stem doesn't align to the front wheel, please adjust stem by loosing stem axle.
4. After alignment, tighten stem
5. Remove top cover from riser, place handlebar and tighten top cover (pic 12)
Pic 11
USS Handlebar
1. Remove top cover from extension holder on the fork , place handlebar and tighten top
cover
2. Align the fork to the front wheel
3. After alignment, tighten stem
Pic 12
Pic 13
- 6-