Install Brake And Shifter Cable; Shifter Cable; Cable For Rear Derailleur (At Right Side) - Performer Goal-26X Assembly Manual

Install Brake and shifter cable

The routing way is not important, while sharp bends are avoided.
If your hand shifter is twister, it has been installed on handlebar and been threaded
shifter wire. As for bar-end shifter, please slide the shifter wire into the small hole of
bar-end shifter first. Cable guides are on the front boom, rear chain stay or under the
frame.

Shifter cable

Cable for rear derailleur (at right side)

1. String shifter wire into cable
2. Tuck cable into cable guide (pic14)
3. Thread shifter cable into rear derailleur, pull tightly and seal the end (pic 15/16)
Check the cable between the cable stop and derailleur, which shouldn't be slack
4.
Pic 13
Pic 15
Pic 14
Pic 16
- 9-