Brake Cable; Rear Brake Cable (At Right Side); Front Brake Cable (At Left Side) - Performer Goal-26X Assembly Manual

Brake cable

Rear brake cable (at right side):

1. Squeeze the brake lever to open it up and place the head of the cable into the lever.
2. String the brake wire into cable. (pic20)
3. Tuck the cable into cable guide. (pic 21/22)
4. Thread brake cable into brake arm.(pic 23)
5. When the wheel starts to drag slightly, adjust the brake pad relief by using the pad
adjusting knobs.
Pic 20 Pic 21
Pic 22 Pic 23

Front brake cable (at left side)

Repeat the same for the other side
- 11-