Focus Adjustment; Neck Assy Twist Adjustment - Sony TRINITRON KV-ES34M81 Service Manual

KV-ES34M81/ES34M91
RM-916
(3) Screen-corner Convergence
b
a-d : screen-corner
c
Fix a Permalloy assy corresponding to the misconverged
areas.
a
d
Permalloy assembly
http://cxema.ru
a
misconvergence
d
b
c

4-3. FOCUS ADJUSTMENT

Note
Focus adjustment should be completed before W/B adjustment.
(1) Receive digital monoscope pattern.
(2) Set "A/V CONTROL" to "STANDARD".
(3) Adjust FOCUS VR so that the center of the screen becomes
justfocus.
(4) Change the receiving signal to white pattern and blue back.
(5) Confirm MAGENTA RING should not be over the limit sam-
ple. In case MAGENTA RING is over the limit sample, adjust
FOCUS VR to take tracking of MAGENTA RING and FO-
CUS.
Focus
Screen (No Function)
FLYBACK TRANSFORMER (T6803)

4-4. NECK ASSY TWIST ADJUSTMENT

(1) Receive dot/hatch pattern.
(2) Turn FOCUS VR fully counter-clockwise.
(3) Confirm the dot shape at the screen center. (Fig. 4-4)
(4) Resume FOCUS VR.
Note
In case of turning NECK ASSY, loosen the screw 3 turns. Do not
move the position.
OK
Turn NECK ASSY clockwise.
Turn NECK ASSY counter clockwise.
– 44 –
Fig. 4-4