Reset Button - Toshiba Canvio AeroCast User Manual

Getting Started
22
Connect to Canvio AeroCast™

Reset button:

❖
In Wireless LAN mode, press and hold for 5 seconds. The
system will restore to its factory settings.
On/Off button:
❖
Press and hold for 2 seconds: Wireless LAN mode turns ON.
❖
Press and hold for 2 seconds again: Wireless LAN mode
turns OFF.
NOTE
USB 3.0 port:
❖
Compatible with USB 3.0 and USB 2.0.
❖
Allows for data transfer between a computer and the Canvio
AeroCast™ Wireless Hard Drive, when connected.
❖
Allows you to charge the product battery when connected to
the AC adaptor.
Battery Indicator light:
❖
Green: 30% or more available battery power.
❖
Yellow: 10%-30% remaining battery power.
❖
Orange (blinking fast): the product is out of battery power or
the operating temperature is too high. The product will shut
down after 30 seconds.
❖
Green or Yellow (blinking slowly): The battery is charging.
❖
Green (Not blinking): Finished charging.
❖
Green or Yellow (blinking fast): The product is shutting down
or turning ON.
❖
LED Off: The device is powered OFF.
Wireless LAN/HDD indicator:
❖
Wireless LAN Mode
❖
Blue: Wireless LAN is ON (no data access).
❖
Blue (blinking): Wireless LAN is ON (storage access
available).
❖
Blue (turned off): Wireless LAN is OFF.
If the battery is too low, you cannot turn the Canvio
AeroCast™ Wireless Hard Drive ON. The battery
indicator will blink orange for 6 seconds, and then turn
off.