Logging - Geist R Series Instruction Manual

30 R-Series PDU v4 Instruction Manual
2. Set the desired conditions for this Event as follows:
a. Enter the URL of the online camera.
b. Select the Make/Model of camera you are connecting to.
c. Enter the Username if necessary.
d. Enter the Password if necessary.
3. Click Save.
To delete a Camera:
To remove a Camera entirely, click the Delete icon to remove the Camera from the
list, then click Delete to confirm:

4.1.4 Logging

The Logging page allows the user to access the historical data recorded by the PDU
by selecting the desired sensors and time range to be logged. The Data Graph
section contains the historical graph, time range drop-down menu, and a list of
enabled measurements. Only those with the "Graph" check-box selected will be
graphed.
The PDU will default to log all data at a rate of one point per minute. Please note that
although data is logged once per minute, all sensor data used in the real time display
and alarm functions is read at least once every 15 seconds for internal sensors and
approximately once every 30 seconds for external sensors.
© 2014 Geist