Ariens Pro 32 Track 12V Quick Start Manual page 2

Remove the lower and loosen the upper hardware on the

handlebar assembly.

Loosen the hardware on the shift rod.

Put the speed selector lever in the fastest reverse position.

Rotate the handlebars into operating position.

NOTE: The handlebar has two height positions. Adjust the

handlebar height to provide better operator comfort. See

Handlebar Height in Owners Manual.

Install and tighten the hardware on the handlebar assembly

and shift rod.

Check tension on auger and traction clutch cables.

IMPORTANT: Cables should not be slack or under tension. Adjust

as necessary.

Step One:

Unfold Handlebar

Table of Contents

Pro 32