Generac Power Systems GTV99O Service Manual page 64

SECTION l3: ENGINE ASSEMBLY
2. Assemble governor leverto governor arm. DO NOTtighten
at this time.
3. lnnall speed adjust assembly_
a. Torque screws to 6.0 Nm (53 in. lbs.).
4. lnstallexhaust.
a.Torque screws to 27.0 Nm (20ft. lbs.).
5. Installfan and retaining ring.
a. Torque screws to 21.7 Nm (16 ft. lbs.).
6. lnstall blower housing.
a.Torque screws to 7.0 Nm (65 in. lbs.).
7. Install rotating Screen.
8. Install intake manifold assembly.
a- Toque bolts to 19 Nr. (14 ft. lbs.)
9. Installfinger guard.
a. lf engine is equipped with socket head scrcws, torque
screws to 4.5 Nm (40 in. lbs).
10. Connect governor llnkage and speed contrcl tinkage.
I1. Install spark plugs_
a.Torque spark plugsto 19 Nm (14 ft. tbs.).
ADJUST 6OVERNOR
Note: Refer to Sedion 4, Page 4-2 fot Stati. covehor
Adjustment
WARNING: BETORE STARTING OR RUNNING ENGtNE,
static adjustment of the governor must be com-
pletedl Failure to make the natic adjunments first
could result in engine overspeeding whid may reruh
in engine damage, property damage or personal
injury