Brickcom MD-500Ap-360P Series Easy Installation Manual page 4

3. Choose the location on the wall or ceiling to place the camera. Attach the location sticker
to the desired spot.
4. Drill three holes through the center of the three location holes on the sticker.
5. Hammer the three plastic anchors which are provided in the product package into the
three location holes.
6. It is recommended that the waterproof RJ45 Ethernet connector (for the RJ45 Ethernet models
only) be used, and then the waterproof tape be used to wrap around the Ethernet connector and
the DC12V connector, in order to prevent water from going into the connectors.
- 4 -