Technical Data - Bosch 0 275 007 025 Owner's Manual

Drive unit | intuvia | powerpack | charger performance line
Table of Contents

Advertisement

Technical Data

Drive unit
Article number
Power
Torque at drive, max.
Rated voltage
Operating temperature
Storage temperature
Degree of protection
Weight, appox.
Intuvia
Article number
Max. charging current,
USB connection
Charging voltage,
USB connection
Operating temperature
Storage temperature
Charging temperature
Degree of protection
Weight, appox.
This device is in compliance with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device must not cause harmful interference, and
(2) this device must accept any interference that is received, in-
cluding interference that may cause undesired operation.
This device is in compliance with CAN ICES-3(B)/NM B-3(B).
Lighting*
Rated voltage
Power output
– Front light
– Rear light
* Not possible via the eBike battery pack in all country-specific ver-
sions, depending on the statutory regulations
Bosch eBike Systems
0 275 007 025
W
Nm
V
°F
+23...+104
°F
+14...+122
IP 54 (dust and splash
water protected)
lb
1 270 020 909
mA
V
°F
+23...+104
°F
+14...+122
°F
+32...+104
IP 54 (dust and splash
water protected)
lb
V
W
W
Assembly
Inserting and Removing the Battery Pack
To insert or remove the battery pack in/from the eBike,
350
please read and follow the battery pack operating instruc-
60
tions.
36
Inserting and Removing the Display Unit
8.8
500
4
5
3 Display unit
4 Holder for display unit
15 Lock latch for display unit
16 Locking screw for display unit
0.3
To insert the display unit 3, slide it from the front into the
holder 4.
To remove the display unit 3, press the lock latch 15 and
slide the display unit toward the front out of the holder 4.
 Remove the display unit when you park the eBike.
It is possible to secure the display unit against removal in
the holder. To do so, remove the holder 4 from the handle-
bars. Put the display unit in the holder. Screw the locking
6
screw 16 (thread M3, 8 mm long) from below into the
thread provided in the holder. Attach the holder back onto
6.6
the handlebars.
0.6
English–19
3
15
16
0 276 001 SPUen | (23.4.14)

Advertisement

Table of Contents
loading

This manual is also suitable for:

1 270 020 9090 275 007524/5250 275 007 906

Table of Contents