Bristol Babcock Network 3000 Setup Manual page 84

Chapter 4 - Guidelines For Configuring the BSAP Data Link
Radio Tip - If messages are truncated when using RTS/CTS, try this...
If you are using RTS/CTS with radios, and encounter a problem where the Open
BSI workstation can transmit, but RTUs are unable to respond, it could be related
to PC port configuration in Windows 95 which results in messages being truncated.
If this problem is occurring, go to "Start"
then "Settings" and "Control Panel" to
call up the Windows 95 control panel.
Next double-click on the 'System' icon.
The System Properties dialog box will
appear. Click on the 'Device Manager'
tab.
Click on the plus sign '+' next to the
'Ports (COM & LPT)' selection. A list of
ports will appear. Click once on the port
used for Open BSI communications
(typically COM1 or COM2), then click on
the [Properties] push button.
Page 4-38 Network 3000 Communications Configuration Guide