Heat Run Mode - Denon S-52 DAB Service Manual

Q Q
3. Heat Run Mode (S-52) 3 7 6 3 1 5 1 5 0
3.1. preparation
(1) Equipment used: CD
(2) Unit setting : No spec other than the following procedure.
3.2. procedure
Perform heat run of the CD.
(1) Pressing the and DIMMER buttons simultaneously, plug the AC cord into a power outlet. This sets the heat run mode.
(2) Check both the SOURCE LED and "RETURN LED" indicators light on the fluorescent display tube.
(3) Press the button after inserting a disk (or with a disk already inserted) to execute the heat run mode. All tracks on the disc
/
will be played.
NOTE) If disc being used has less than 20 tracks, play all tracks. If disc has 21 or more tracks, skip to final track after playback
of first track has finished.
(4) Once playback is completed, eject and insert the disk and repeat the playback operation in step (3).
(5) If there is an error while in the Heat run mode, the error is displayed and the stop mode is set with the status at that time.
NOTE) The buttons on the remote control unit will not work during the heat run mode.
(If the set's power is turned off pressing the FUNCTION ON/OFF button, the CD stops and the heat run mode is canceled.)
Error code Error contents
0x0000 No error
0x0003 System Interface error
0x0500 - 0x0501 File Check error
0x0F01 Fatal error on CD ROM drive (Time out etc.)
0x0400 - 0x040E CD ROM Drive error
T E
L 1 3 9 4 2 2 9 6 5 1 3
w w w
.
http://www.xiaoyu163.com
x a o u 1 6 3
y
i
http://www.xiaoyu163.com
8 9
Q Q
3 7 6 3 1 5 1
c o
.
31
2 4 9 8 2
/
5 0 8 9 2 4 9 8 2
m
S-52/S-52DAB/S-32
9 9
9 9