Panasonic DMR-EH50 Operating Instructions Manual page 59

Tabs
Connection
TV Aspect ( 22)
Progressive ( 22)
This setting cannot be
made when the "AV1
Output" is set to "RGB
(without component)"
( below).
TV System ( 62)
AV1 Output
Selects the output from the AV1 terminal.
Select "RGB (without component)" for RGB output.
Select "Video (with component)" or "S Video (with component)"
for component output.
AV2 Settings
Set to match the connected equipment.
≥Press [ENTER] to show the following settings.
AV2 Input
Set to "RGB/Video" or "RGB" when receiving or recording RGB
output from external equipment.
Ext Link
This setting cannot be made when the "TV System" is set to
"NTSC" ( 62).
Others Remote Control (
Clock
Auto Clock Setting (
Manual Clock Setting (
Owner ID ( 19, 20)
In order to prevent another person from using this unit if it is
stolen, you can set a PIN number and input your personal
information.
Once the PIN number has been set, you cannot return to the
factory preset. Make sure not to forget this.
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
can start recording soon after deciding you want to record
something.
§
Only when recording to the HDD or DVD-RAM.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
Shipping Condition
All the settings except for the ratings level, ratings password,
Owner ID and time settings return to the factory preset. The timer
recording programmes are also cancelled.
Default Settings
All the settings except for the programmed channels, time
settings, disc language settings, ratings level, ratings password,
Owner ID and remote control code return to the factory presets.
Menus
Set to match the type of television
connected.
23)
61)
61)
§
after turning it on. You
Options (Underlined items are the factory presets.)
≥16:9 ≥4:3 ≥Letterbox
≥On ≥Off
≥PAL ≥NTSC
≥Video (with component)
≥S Video (with component)
≥RGB (without component)
≥RGB/Video ≥RGB ≥Video
≥Ext Link 1: When a digital receiver (SKY Digital STB etc.) which
transmits a special control signal recordings via the
21-pin Scart lead is connected.
≥Ext Link 2: When external equipment with a timer function is
connected.
≥DVD 1 ≥DVD 2
≥PIN number ≥Name ≥House No. ≥Postcode
≥On
≥Off:
Standby power consumption is less than when this is set
to "On"
≥Yes
≥No
≥Yes
≥No
≥S Video
≥DVD 3
RQT8033
59