Disassembly - Pioneer PDP-R03E Service Manual

7.1.2 DISASSEMBLY

1. Remove the six lock screws from the back of the top cabinet. Slide the top cabinet backward and detach it.
2. Remove the three lock screws from the front panel. Undo the three hooks at the top and the four hooks at the
bottom, and detach the front panel.
3. Remove the two hexagonal shafts from the front shield. Undo the two hooks on both sides and detach the
front shield.
4. Remove the three lock screws from the front unit and detach this unit.
5. Remove the one lock screw from the LED unit and detach this unit.
6. Remove the PC I/F unit and SR connect unit assemblies.
6-1. Remove the two hexagonal shafts each from the system cable (white) terminal and the RS-232C terminal,
both on the PC I/F unit.
6-2. Remove the two lock nuts from the control terminal on the SR connect unit, and the two lock screws from
the system cable (gray) terminal also on the SR connect unit.
6-3. Remove the two lock screws from the PC I/F unit bracket.
6-4. Remove the four lock screws from the PC I/F unit and SR connect unit assemblies. Take out these
assemblies.
6-5. Remove the three lock screws from the brackets of the PC I/F unit and SR connect unit assemblies.
Detach the shield.
6-6. Remove the six lock screws from the PC I/F unit. Detach this unit from the bracket.
6-7. Remove the two lock screws from the SR connect unit. Detach this unit from the bracket.
7. Remove the seven lock screws from the main unit and detach this unit.
8. Remove the AV unit.
8-1. Remove the six lock screws from the AV unit.
8-2. Remove the six lock screws from the AV unit and detach this unit.
9. Remove the EMC unit assemblies.
9-1. Remove the two lock screws from the EMC unit bracket.
9-2. Remove the two lock screws from the EMC unit and detach this unit.
10. Remove the three lock screws from the power unit and detach this unit.
6-4
F
PC I/F Unit
D
SR
4
CONNECT
Unit
6-7
B
FRONT Unit
2
LED Unit
5
2
6-5
A
MAIN Unit
6-6
9-2
EMC Unit
H
10
POWER Unit
G
E
3
3
3
Top cabinet
7
8-2
AV Unit
C
6-1
9-1
6-3
6-2
8-1
SERVICE JIGS
Extension Cable (30-Pin) QCNW-6099CEZZ
Extension Cable (50-Pin) QCNW-6100CEZZ
Extension Cable (4-Pin)
Bottom cabinet
Extension Cable (13-Pin) QCNW-6102CEZZ
Extension Cable (12-Pin) QCNW-6103CEZZ
PDP-R03E
1
QCNW-6101CEZZ
107