Description - Shindaiwa F226S Operator's Manual

Description

1. Cutting attachment Nylon line cutting head for cutting
grass and weed.
2. Shield Device to protect the operator from accidental
contact with the cutting head and thrown objects.
3. Cut off knife Cut nylon line to adjust line length to proper
swath.
4. Shaft tube Part of the unit that provides a casing for pow-
er transmission shaft.
5. Loop-handle Light weight, suitable for nylon line trimmer.
6. Ignition switch "Slide switch" mounted on top of the
throttle trigger housing, move switch forward to RUN,
backward to STOP position.
Description
7. Throttle trigger Activated by the operator's finger for con-
trolling the engine speed.
8. Throttle trigger lockout Locks throttle trigger in the idling
position until you have a proper grip with your right hand
around the handle.
9. Grip Rear (right hand) handle.
10. Air cleaner cover Covers air filter.
11. Fuel tank Contains fuel and fuel filter.
12. Fuel tank cap For closing the fuel tank.
13. Starter handle Pull handle to start the engine.
14. Silencer cover Cover the silencer not to make operator
touch to hot surface of silencer.
15. Spark plug
16. Safety decal
8