Picture Menu; Picture Mode; Picture/Brightness/Color/Hue/Sharpness/Backlight; Reset - Sony KLV-B20G10 Service Manual

Picture menu

Picture

Picture Mode

Picture

Brightness

Color

Hue
Sharpness

Backlight

Reset

NR
Color Temperature
Select: Enter: Back:
OK

Picture Mode

Selects the picture mode.
1
2

Picture/Brightness/Color/Hue/Sharpness/Backlight

1
2

Reset

Resets all the picture settings to the factory settings.
1
2

NR (Noise Reduction)

Reduces the picture noise (snowy picture) in a weak broadcast signal.
1
Personal
80
50
50
0
15
7
Auto
Cool
End:
MENU
Press OK to select "Picture Mode".
Press M/m to select one of the following picture modes, then press OK.
Live: For watching live broadcasts.
Personal: Allows you to store your own preferred settings.
Movie: For watching movies.
Tip
You can also change the picture mode by pressing
Press OK to select the option.
Press </, to set the level, then press OK.
Tip
"Hue" can only be adjusted for an NTSC color signal (e.g., U.S.A. video tapes).
Press OK to select "Reset".
Press M/m to select "OK", then press OK.
Press OK to select one of the following NR settings.
Auto: Automatically reduces the picture noise.
Off: Turns off the noise reduction feature.
You can select the options listed below on the Picture
menu. To select options, see "Navigating through
menus" (page 18).
Tip
When you set the "Picture Mode" option to "Live" or
"Movie", you can adjust only "Picture", "Reset", "NR" and
"Color Temperature".
repeatedly.
Continued
19
GB