Dual Sound; Intelligent Volume - Sony KLV-B20G10 Service Manual

Dual Sound

Intelligent Volume

22
GB
Selects the sound of NICAM or A2 (German) stereo system.
1
Press OK to select "Dual Sound".
2
Press M/m to select one of the following, then press OK.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select "Mono". The sound
becomes monaural, but the noise is reduced.
• The "Mono" setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the program position.
• You cannot receive stereo or dual sound when "Low" or "High" is selected in "Audio Filter".
Tips
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand, etc.
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be
louder than programs).
1
Press OK to select "Intelligent Volume".
2
Press M/m to select "On", then press OK.
Selection
(stereo sound)
NICAM
Mono (regular sound)
(main sound)
NICAM Main
NICAM Sub (sub sound)
Mono (regular sound)
(main sound)
NICAM Main
Mono (regular sound)
Stereo (stereo sound)
Mono (regular sound)
(main sound)
Main
Sub (sub sound)