Tampering Warning - Husqvarna CR 1225 2012 Quick Manual

Tampering warning

Tampering with Noise Control System Prohibited .
Federal law prohibits the following acts or causing
thereof:
(1) The removal or rendering inoperative by any person
other than for purposes of maintenance, repair, or
replacement, of any device or element of design
incorporated into any new vehicle for the purpose
of noise control prior to its sale or delivery to the
ultimate purchaser or while it is in use, and
(2) the use of the vehicle after such device or element of
design has been removed or rendered inoperative
by any person .
Among those acts presumed to constitute tampering are
the acts listed below .
1) Removal of, or puncturing the muffler, baffles, header
pipes or any other component which conducts exhaust
gases .
2) Removal or puncturing of any part of the intake sys-
tem .
3) Lack of proper maintenance .
4) Replacing any moving part of the vehicle, or parts of
the exhaust or intake system, with parts other than
those specified by the manufacturer .
8000H7113-CR-WR125_MY2012_ed0_06-2011.indd 17
Warning statement
This product should be checked for repair or replace-
ment if the motorcycle noise has increased significantly
through use .
Otherwise, the owner may become subject to penalties
under state and local ordinances .
QUICK MANUAL EN - 17
12-07-2011 9:02:08