Connecting To Optional Equipment - Toshiba 15DLV77C Service Manual

Connections

Connecting to optional equipment

You can enjoy VCR, camcorder or TV game with connection to external
input.
Using the audio/video inputs
Press INPUT SELECT repeatedly to select the desired mode.
"VIDEO1", "VIDEO2", "ColorStream" or TV channel will display on the screen for 4 seconds.
TV Channel VIDEO1 VIDEO2
(Rear lower left) (Left side)
ColorStream
Note: This key will not operate in DVD mode.
Connecting to a VCR
To playback from the VCR, connect the VCR to the TV/DVD as shown.
Select the "VIDEO2" by pressing INPUT SELECT repeatedly.
: Signal Á ow
To Audio/Video OUT
Audio/Video cable (not supplied)
Note: Picture might be muted for some VCR playback. This is not a malfunction of this unit.
Connecting to a camcorder
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.
Select the "VIDEO2" by pressing INPUT SELECT repeatedly.
: Signal Á ow
Camcorder
To Audio/Video OUT
Audio/Video cable (not supplied)
Connecting to a TV Game
You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.
1. Connect a TV Game to the TV/DVD.
2. Select the "GAME" by pressing GAME.
The GAME mode screen appears.
• This TV/DVD has the GAME mode function (see page 24).
: Signal Á ow
To Audio/Video OUT
Audio/Video cable (not supplied)
Notes:
• You can also change the TV screen to the desired mode by pressing the CH +/– buttons.
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal
generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection
diagrams. You'll need to consult each component's Owner's Manual for additional information.
• Interactive video games that involve shooting a "gun" type of joystick at on-screen target may not work on this TV/DVD.
16
J5X00401A(Eng).indb 16
Connections
Connecting to optional equipment (Continued)
You can enjoy high quality dynamic sounds by connecting the
TV/DVD to optional audio equipment.
Connecting to an ampliÀ er equipped with a Dolby
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce
this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital
recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel ampliÀ er equipped with a Dolby
Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full beneÀ t of
Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the
Dolby Surround mark.
AmpliÀ er equipped with a
Dolby Digital decoder
To COAXIAL
type digital
audio input
75
Connecting to an ampliÀ er equipped with a Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an ampliÀ er and speaker system (right and
left front speakers, a center speaker, and one or two rear speakers).
With an ampliÀ er equipped with a Dolby Digital
Connect the equipment the same way as described in "Connecting to an ampliÀ er equipped with a Dolby Digital decoder."
Refer to that ampliÀ er's owner's manual and set the ampliÀ er so that you can enjoy Dolby Surround Pro Logic sound.
With an ampliÀ er not equipped with a Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
*
AmpliÀ er equipped with a
Dolby Surround Pro Logic
To COAXIAL
type digital
audio input
75
Connecting to an ampliÀ er equipped with a DTS
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full beneÀ t of 5.1 channel DTS encoded sound tracks on DVD
video discs or audio CDs.
AmpliÀ er equipped with
a DTS decoder
To COAXIAL
type digital
audio input
75
18
J5X00401A(Eng).indb 18
INPUT SELECT
GAME
VIDEO1
Left side (LINE 2 IN)
(red)
VCR The LINE 1 IN
(white)
terminals can be used
(yellow) in the same way.
To AUDIO(L/R)/VIDEO IN
Left side (LINE 2 IN)
(red)
(white)
The LINE 1 IN
terminals can be used
(yellow)
in the same way.
To AUDIO(L/R)/VIDEO IN
Left side (LINE 2 IN)
(red)
(white) Only the LINE 2
IN terminals can
(yellow)
be used with the
GAME mode.
To AUDIO(L/R)/VIDEO IN
* This section uses the following reference mark.
: Front speaker : Center speaker
: Rear speaker : Signal Á ow
: Sub woofer
® Digital decoder
Rear lower left of the TV
To COAXIAL DIGITAL
Manufactured under license
AUDIO OUT
from Dolby Laboratories.
Dolby, and the double-D
coaxial cable (not supplied)
symbol are trademarks of
Dolby Laboratories.
Rear lower left of the TV
To COAXIAL DIGITAL * Connect one or two rear
AUDIO OUT speakers. The output sound
from the rear speakers will be
monaural even if you connect
coaxial cable (not supplied)
two rear speakers.
® decoder
Rear lower left of the TV
To COAXIAL DIGITAL
AUDIO OUT
"DTS" and "DTS Digital Out"
are registered trademarks of
coaxial cable (not supplied)
DTS, Inc.
Connecting to an optional equipment with S-video output
If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the left side of the TV/DVD, you must
also connect the audio cables to the AUDIO IN (LINE 2 IN) jacks on the left side of the TV/DVD. The S-VIDEO
cable only carries the video signal. The audio signal is separate.
Select the "VIDEO2" by pressing INPUT SELECT repeatedly.
: Signal Á ow
To S-VIDEO OUT
Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.
Connecting an optional equipment with ColorStream
Your TV/DVD is capable of using ColorStream
video compatible DVD player, such as a Toshiba DVD player with ColorStream
quality and performance.
Ex. DVD player with Component video
: Signal Á ow
To Component
Video OUT
Selecting Component input mode
Press INPUT SELECT repeatedly to
select "ColorStream" mode.
The ColorStream ® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals.
This unit will not accept or display 720p progressive scan signals or 1080i interlaced high-deÀ nition signals. If you connect a high-
deÀ nition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit's ColorStream
SWITCH THE DEVICE'S OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a
poor or no picture to display.
Notes:
• Refer to the owner's manual of the connected equipment as well.
• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the
tuner and radio.
3/5/2550 12:11:10 J5X00401A(Eng).indb 17
Connecting to an ampliÀ er equipped with an MPEG audio decoder
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic
realistic sound by connecting an ampliÀ er equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Connecting to an ampliÀ er equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an ampliÀ er equipped with a digital audio input and
speaker system (right and left front speakers).
Note: PCM audio is limited to DVD or CD playback.
Notes:
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the TV/DVD.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor.
• Refer to the owner's manual of the connected equipment as well.
• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening
level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the ampliÀ er before you connect or disconnect the TV/DVD's power cord. If you leave the ampliÀ er's power on, the
speakers may be damaged.
3/5/2550 12:11:11 J5X00401A(Eng).indb 19
(red)
(white)
Ex. VCR with S-Video
To AUDIO (L/R) IN
(playback)
To Audio (L/R) OUT
Audio cable (not supplied)
S-Video cable (not supplied)
® (Component video) output
®
(component video). Connecting your TV/DVD to a component
Rear lower right of the TV
To AUDIO (L/R) IN
To Audio OUT
Audio cable (not supplied)
Component video cable (not supplied)
When using the Component video cable,
an Audio cable must be connected to
AUDIO IN (L/R) (LINE 1 IN) jacks.
ColorStream
Rear lower left of the TV
AmpliÀ er equipped with an
MPEG2 audio decoder
To COAXIAL
To COAXIAL DIGITAL
type digital
AUDIO OUT
audio input
75 coaxial cable (not supplied)
Rear lower left of the TV
AmpliÀ er equipped with a
Digital audio input
To COAXIAL To COAXIAL DIGITAL
type digital AUDIO OUT
audio input
75 coaxial cable (not supplied)
Left side (LINE 2 IN)
To S-VIDEO IN
®
can greatly enhance picture
To COMPONENT
(Y, P , P ) IN
B R
® inputs, YOU MUST
17
3/5/2550 12:11:11
19
3/5/2550 12:11:12